Description of DPLI 850W-X
The E-Two-Wheeler Charger, model no. DPLI 850W-X by Drone Power EV charging solutions, is engineered to deliver efficient charging for electric two-wheelers. Its technical specifications include an AC RMS input voltage range of 160-285VAC and a maximum input current of 6A, with a peak efficiency exceeding 90%. The DC output offers a rated power of 850W, with a maximum output voltage of 84.0V and a maximum output current of 10A. Key protections include safeguards against overcurrent, overvoltage, short circuit, and reverse battery polarity.
Notable features consist of soft start and Pri-charging function, with LED indicators for power status and state of charge, complemented by a buzzer after full charge. Connectors feature DC Output Connector EMO/SBS75X/CHOGORI and AC Input Connector 16A 3 PIN Inbuilt Top.
Environmental specifications encompass an operating temperature range of 0°C to 50°C and humidity range of 5% to 90% non-condensed, with IP 21 enclosure protection. The charger employs forced air cooling, with dimensions approximately 218mm x 105mm x 70mm and a weight of about 1.900 kg. Variants of the charger are available, including the 850W (72V) Charger, suitable for both NMC & LFP batteries, with configurations customizable according to customer requirements.
Salient Features of DPLI 850W-X
Micro Controller
Based Smart SMPS Charger
Temperature Protection
Over Temperature Protection
Charging
Multistage CC-CV Charging
Short Circuit Protection
Short Circuit Protection
Battery Protection
Battery Reverse Polarity Protection
Rating
48V 10A, 60V 10A, 72V 10A
BMS
BMS Auto Fault Reset Switch
Maximum Power
1000W
Voltage Protection
Over Voltage & Over Current Protection
Communication
CAN (optional)
AC RMS Input Voltage Range | 160VAC-285VAC RMS, Single Phase | ||
Maximum AC RMS Input Current | 6A (±1 A) | ||
Maximum AC Input Power | 943 W (±50 W) | ||
AC Input Frequency | 47Hz-53 Hz | ||
Peak Efficiency | >90% | ||
Power Factor | 0.6 @ 230 Vac | ||
Inrush Current | <84A |
Rated Power | 850W (±50 W) | ||
Maximum DC Output Current | 10A (±1 A) | ||
Maximum DC Output Power | 840 W @ 230 Vac | ||
Maximum Output Voltage | 84.0V (±0.2 V) | ||
Ripple | Voltage(pk-pk) | 20 mV(±10mV) | |
Current(pk-pk) | 300 mA(±10mA) | ||
Line Regulation | <2% | ||
Load Regulation | <2% | ||
Battery Type | LITHIUM ION |
Over Current | >=10A+1A | ||
Over Voltage | 84.0V (+0.2V) | ||
Short Circuit Output | 40A | ||
Over Temperature | PROVIDED | ||
Reverse battery polarity | PROVIDED |
Soft start | YES | ||
Pri-charging function | PROVIDED |
LED Indication | POWER ON (Green) | ||
CHARGING ON (RED- BLINK) | |||
FULL CHARGE (GREEN- SOLID) | |||
BUZZER | AFTER FULL CHARGE (30 SECONDS) |
DC Output Connector | EMO/SBS75X/CHOGORI | ||
AC Input Connector | 16A 3 PIN Inbuilt Top | ||
Input Wire Length | 1500mm (±50mm) | ||
Input Wire Copper | 1 SQ mm 3 CORE | ||
Output Wire Length | 600mm (±50mm) | ||
Output Wire Copper | 3 SQ mm 2 CORE |
Operating Temperature | 0°C to 50°C | ||
Humidity | 5 to 90% non-Condensed | ||
Storage Temperature | 0 °C to 50 °C | ||
Testing Result at %95 RH@38°C | Passed |
EMI | Inbuilt EMI Filter |
Enclosure Protection | IP 21 | ||
Dimension(L*W*H) | ~(218mmx105mmx70mm) | ||
Cooling | Forced Air Cooling | ||
Drop Test Result (If Applicable) | PASS | ||
Weight | ~1.900 Kg |