Description of DPLI 600W-X
The E-Two-Wheeler Charger, model no. DPLI 600W-X by Drone Power EV charging solutions, is designed to provide efficient charging for electric two-wheelers. Its technical specifications include an AC RMS input voltage range of 160-285VAC and a maximum input current of 4.5A, with a peak efficiency exceeding 89%. The DC output offers a rated power of 600W, with a maximum output voltage of 67.2V and a maximum output current of 10A. Key protections include safeguards against overcurrent, overvoltage, short circuit, mains high-cut, and reverse battery polarity.
Notable features consist of soft start and Pri-charging function, with LED indicators for power status and state of charge. Connectors feature DC Output Connector EMO-40/SBS75X/Chagori and AC Input Connector 3 PIN Inbuilt Top.
Environmental specifications encompass an operating temperature range of 0°C to 50°C and humidity range of 5% to 90% non-condensed, with IP 21 enclosure protection. The charger employs forced air cooling, with dimensions approximately 200mm x 105mm x 70mm and a weight of about 1.5 kg. Variants of the charger are available, including the 600W (60V) Charger, suitable for both NMC & LFP batteries, with configurations customizable according to customer requirements.
Salient Features of DPLI 600W-X
Micro Controller
Based Smart SMPS Charger
Temperature Protection
Over Temperature Protection
Charging
Multistage CC-CV Charging
Short Circuit Protection
Short Circuit Protection
Battery Protection
Battery Reverse Polarity Protection
Rating
48V 10A, 60V 10A, 72V 10A
BMS
BMS Auto Fault Reset Switch
Maximum Power
600W
Voltage Protection
Over Voltage & Over Current Protection
Communication
CAN (optional)
AC RMS Input Voltage Range | 160VAC-285VAC RMS, Single Phase | ||
Maximum AC RMS Input Current | 4.5 A (± 0.5 A) | ||
Maximum AC Input Power | 756 W (± 25 W) | ||
AC Input Frequency | 47Hz-53 Hz | ||
Peak Efficiency | >89% | ||
Power Factor | 0.64 @ 230 Vac | ||
Inrush Current | <61A |
Rated Power | 600 W (± 100 W) | ||
Maximum DC Output Current | 10 A (± 0.5 A) | ||
Maximum DC Output Power | 673 W @ 285Vac | ||
Maximum Output Voltage | 67.2 V (±0.2 V) | ||
Ripple | Voltage(pk-pk) | 160 mV (± 20mV) | |
Current(pk-pk) | 250 mA (± 20mA) | ||
Line Regulation | <2% | ||
Load Regulation | <2% | ||
Battery Type | LITHIUM ION |
Over Current | >10A+1A | ||
Over Voltage | 67.2 V (+0.2V) | ||
Short Circuit Output | PROVIDED | ||
Over Temperature | PROVIDED | Mains high-cut | 295-300 Vac |
Reverse battery polarity | PROVIDED |
Soft start | YES | ||
Pri-charging function | PROVIDED |
Power on | Green LED solid glow | ||
Can-communication | 40% LED blink 3 times per sec initially | ||
SOC indication | (40%,70%,100% )green LED blink. | ||
Full charge | 100% green LED solid glow. |
DC Output Connector | EMO-40/SBS75X/Chagori | ||
AC Input Connector | 3 PIN Inbuilt Top | ||
Input Wire Length | 1500mm (±50mm) | ||
Input Wire Copper | 0.75 SQ mm 3 CORE | ||
Output Wire Length | 1500mm (±50mm) | ||
Output Wire Copper | 2.50 SQ mm 2 CORE |
Operating Temperature | 0 °C to 50 °C | ||
Humidity | 5 to 90% non-Condensed | ||
Storage Temperature | 0 °C to 50 °C | ||
Testing Result at %95 RH@38°C | Passed |
EMI | Inbuilt EMI Filter |
Enclosure Protection | IP 21 | ||
Dimension(L*W*H) | ~(200mmx105mmx70mm) ±5mm | ||
Cooling | Forced Air Cooling | ||
Drop Test Result (If Applicable) | PASS | ||
Weight | ~1.5 kg |