Description of DPLI 350W-X
The E-Two-Wheeler Charger, model no. DPLI 350W-X by Drone Power EV charging solutions, offers efficient charging capabilities with precise technical specifications. It supports an AC RMS input voltage range of 160-285VAC, with a maximum input current of 3.0A and power of 474W. The DC output delivers a rated power of 350W, with a maximum output voltage of 67.2V and a maximum output current of 6A. Key protections include safeguards against overcurrent, overvoltage, short circuit, and reverse battery polarity.
Connectors feature DC Output connector EMO-40 and AC Input connector 3 PIN Inbuilt 6A-Top. Environmental specifications encompass an operating temperature range of 0°C to 50°C and humidity range of 5% to 90% non-condensed.
Safety features include an inbuilt EMI filter and IP 21 enclosure protection. The charger employs forced air cooling, with dimensions approximately 190mm x 114mm x 70mm and a weight of about 1.45 kg. Variants of the charger are available, including the 350W (60V) Charger, with configurations customizable according to customer requirements, suitable for both NMC & LFP batteries up to 60V/6A.
Salient Features of DPLI 350W-X
Micro Controller
Based Smart SMPS Charger
Temperature Protection
Over Temperature Protection
Charging
Multistage CC-CV Charging
Short Circuit Protection
Short Circuit Protection
Battery Protection
Battery Reverse Polarity Protection
Rating
48V 10A, 60V 10A, 72V 10A
BMS
BMS Auto Fault Reset Switch
Maximum Power
500W
Voltage Protection
Over Voltage & Over Current Protection
Communication
CAN (optional)
AC RMS Input Voltage Range | 160VAC-285VAC RMS, Single Phase | ||
Maximum AC RMS Input Current | 3.0 A (± 0.5 A) | ||
Maximum AC Input Power | 474W (± 25 W) | ||
AC Input Frequency | 47Hz-53 Hz | ||
Peak Efficiency | >85% | ||
Power Factor | 0.65 @ 230 Vac |
Rated Power | 350 W (± 50 W | ||
Maximum DC Output Current | 6 A (± 0.5 A) | ||
Maximum DC Output Power | 403 W (± 30 W) | ||
Maximum Output Voltage | 67.2V (±0.2V) | ||
Ripple | Voltage(pk-pk) | 280 mV (± 10mV) | |
Current(pk-pk) | 387 mA (± 10mA) | ||
Line Regulation | <2% | ||
Load Regulation | <2% | ||
Battery Type | LITHIUM ION |
Over Current | >6A+1A | ||
Over Voltage | 67.2 V (+0.2V) | ||
Short Circuit Output | PROVIDED | ||
Over Temperature | PROVIDED | ||
Reverse battery polarity | PROVIDED |
DC Output Connector | EMO-40 | ||
AC Input Connector | 3 PIN Inbuilt 6A-Top | ||
Input Wire Length | 1500mm (±50mm) | ||
Input Wire Copper | 0.5 SQ mm 3 CORE | ||
Output Wire Length | 1500mm (±50mm) | ||
Output Wire Copper | 1.5 SQ mm 2 CORE |
Operating Temperature | 0 °C to 50 °C | ||
Humidity | 5 to 90% non-Condensed | ||
Storage Temperature | 0 °C to 50 °C | ||
Testing Result at %95 RH@38°C | Passed |
EMI | Inbuilt EMI Filter |
Enclosure Protection | IP 21 | ||
Dimension(L*W*H) | ~(190mmx114mmx70mm) ±5mm | ||
Cooling | Forced Air Cooling | ||
Drop Test Result (If Applicable) | PASS | ||
Weight | ~1.45 kg |