Description of DPLA 2KW
The E-Auto-Rickshaw charger, model DPLA 2KW by Drone Power EV charging solutions, features robust technical specifications. Its input parameters include an AC RMS voltage range of 160-285VAC, with a maximum AC RMS input current of 13A and power of 1651W. The DC output specifications boast a rated power of 2KW, with a maximum output voltage of 58.8V and a maximum DC output current of 25A. Protections against overcurrent, overvoltage, short circuit, and reverse battery polarity are provided.
Features such as soft start and Pri-charging function enhance usability. LED indicators signal power, charging status, and full charge. Connectors include DC Output Connector SB-50 and AC Input Connector 16A. Environmental parameters indicate an operating temperature range of 0-50°C and humidity range of 5-90% non-condensed. Safety features include an inbuilt EMI filter and IP 21 enclosure protection. The charger is designed for forced air cooling and weighs approximately 4 kg.
Additionally, variations of the charger are available, with configurations tailored to customer needs, applicable for both NMC & LFP batteries up to 59V/25A.
Salient Features of DPLA 2KW
Micro Controller
Based Smart SMPS Charger
Temperature Protection
Over Temperature Protection
Charging
Multistage CC-CV Charging
Short Circuit Protection
Short Circuit Protection
Battery Protection
Battery Reverse Polarity Protection
Rating
60V 25A
BMS
BMS Auto Fault Reset Switch
Maximum Power
2000W
Voltage Protection
Over Voltage & Over Current Protection
Communication
CAN (optional)
| AC RMS Input Voltage Range | 160VAC-285VAC RMS, Single Phase | ||
| Maximum AC RMS Input Current | 13A (±1 A) | ||
| Maximum AC Input Power | 1651W (±50 W) | ||
| AC Input Frequency | 47Hz-53 Hz | ||
| Peak Efficiency | >90% | ||
| Power Factor | 0.6 @ 230 Vac | ||
| Inrush Current | <84A |
| Rated Power | 2KW (±50 W) | ||
| Maximum DC Output Current | 25A (±1 A) | ||
| Maximum DC Output Power | 1470 W @ 230 Vac | ||
| Maximum Output Voltage | 58.8V (±0.2 V) | ||
| Ripple | Voltage(pk-pk) | 110mV(±10mV) | |
| Current(pk-pk) | 450 mA(±10mA) | ||
| Line Regulation | <2% | ||
| Load Regulation | <2% | ||
| Battery Type | LITHIUM ION | ||
| Over Current | >25A+1A | ||
| Over Voltage | 58.8V (+0.2V) | ||
| Short Circuit Output | PROVIDED | ||
| Over Temperature | PROVIDED | ||
| Reverse battery polarity | PROVIDED |
| Soft start | YES | ||
| Pri-charging function | PROVIDED |
| LED Indication | POWER ON (Green) | ||
| CHARGING ON (RED- BLINK) | |||
| FULL CHARGE (GREEN- SOLID) |
| DC Output Connector | SB-50 | ||
| AC Input Connector | 16A 3 PIN Inbuilt Top | ||
| Input Wire Length | 1500mm (±50mm) | ||
| Input Wire Copper | 2.2 SQ mm 3 CORE | ||
| Output Wire Length | 1500mm (±50mm) | ||
| Output Wire Copper | 6 SQ mm 2 CORE |
| Operating Temperature | 0 °C to 50 °C | ||
| Humidity | 5 to 90% non-Condensed | ||
| Storage Temperature | 0 °C to 50 °C | ||
| Testing Result at %95 RH@38°C | Passed | ||
| EMI | Inbuilt EMI Filter |
| Enclosure Protection | IP 21 | ||
| Dimension(L*W*H) | ~(228mmx142.8mmx70mm) | ||
| Cooling | Forced Air Cooling | ||
| Drop Test Result (If Applicable) | PASS | ||
| Weight | ~4 Kg |