Description of DPLI 3KW
The E-Auto-Rickshaw-Charger, model no. DPLI 3KW by Drone Power EV charging solutions, boasts high-quality technical specifications. It accommodates an AC RMS input voltage range of 120-285Vac, with a maximum input current of 12A and power of 3172W. The DC output provides a rated power of 3000W, with a maximum output voltage of 73V and a maximum output current of 40A. Protections include safeguards against overcurrent, overvoltage, short circuit, and reverse battery polarity.
Notable features consist of soft start and Pri-charging function. LED indicators denote charging status, state of charge (SOC), and full charge. Connectors feature DC Output connectors SB-50/SBS75X/CHAGORI and AC Input connector 16A. Environmental specifications encompass an operating temperature range of 0-50°C and humidity range of 5-90% non-condensed.
Safety features include an inbuilt EMI filter and IP 21 enclosure protection. The charger employs forced air cooling, with dimensions approximately 336mm x 180mm x 160mm and a weight of about 7.2 kg. Variants of the charger are available, including the 3KW (72V) Charger, with configurations customizable according to customer requirements.
Salient Features of DPLI 3KW
Micro Controller
Based Smart SMPS Charger
Temperature Protection
Over Temperature Protection
Charging
Multistage CC-CV Charging
Short Circuit Protection
Short Circuit Protection
Battery Protection
Battery Reverse Polarity Protection
Rating
48V, 60V, 72V
BMS
BMS Auto Fault Reset Switch
Maximum Power
3000W
Voltage Protection
Over Voltage & Over Current Protection
Communication
CAN (optional)
AC RMS Input Voltage Range – Half load | 120Vac-180Vac | ||
AC RMS Input Voltage Range – Full load | 180Vac-285Vac | ||
Maximum AC RMS Input Current | 12 A (±1 A) | ||
Maximum AC Input Power | 3172W (±50 W) | ||
AC Input Frequency | 47Hz-53Hz | ||
Peak Efficiency | >=90% | ||
Power Factor | >0.98 | ||
Inrush Current | <51 A | ||
THD | <7% |
Rated Power | 3000W (±50W) | ||
Maximum DC Output Current | 40 A (±1 A) | ||
Maximum DC Output Power | 2920 W @ 230Vac | ||
Maximum Output Voltage | 73V (±0.2 V) | ||
Ripple | Voltage(pk-pk) | 200 mV (±50mV) | |
Current(pk-pk) | 980 mA (±50mA) | ||
Line Regulation | <2% | ||
Load Regulation | <2% | ||
Battery Type | LITHIUM ION |
Over Current | >=40 A+1A | ||
Over Voltage | 73.0V(+0.2) V | ||
Short Circuit Output | Yes (By RELAY) | ||
Over Temperature | PROVIDED | ||
Reverse battery polarity | PROVIDED |
Soft start | YES | ||
Pri-charging function | PROVIDED |
Charging on | Green LED Solid glow | ||
SOC indication (25%-100%) | 25%,50%,75%,100% LED BLINK | ||
Full charge | All SOC led solid |
DC Output Connector | SB-50/SBS75X/CHAGORI | ||
AC Input Connector | 16A Top Built in with wire | ||
Input Wire Length | 1500mm (±10mm) | ||
Input Wire Copper | 2.5 SQ mm 3 CORE | ||
Output Wire Length | 1500mm (±10mm) | ||
Output Wire Copper | 12 SQ mm 2 CORE |
Operating Temperature | 0 °C to 50 °C | ||
Humidity | 5 to 90% non-Condensed | ||
Storage Temperature | 0 °C to 50 °C | ||
Testing Result at %95 RH@38°C | Passed |
EMI | Inbuilt EMI Filter |
Enclosure Protection | IP 21 | ||
Dimension(L*W*H) | ~(336mm*180mm*160mm) (3±mm) | ||
Cooling | Forced Air Cooling | ||
Drop Test Result (If Applicable) | PASS | ||
Weight | ~7.2 kg |