Description of DPLA 1 KW-X
The E-Rickshaw-Charger, model no. DPLA 1 KW-X by Drone Power EV charging solutions, offers efficient charging capabilities with precise technical specifications. It supports an AC RMS input voltage range of 160-285VAC, with a maximum input current of 6.5A and power of 1056W. The DC output delivers a rated power of 1KW, with a maximum output voltage of 58.8V and a maximum output current of 16A. Key protections include safeguards against overcurrent, overvoltage, short circuit, and reverse battery polarity.
Notable features consist of soft start and Pri-charging function. LED indicators denote power status, charging progress, and full charge. Connectors feature DC Output Connector SMH-50 and AC Input Connector 16A. Environmental specifications encompass an operating temperature range of 0-50°C and humidity range of 5-90% non-condensed.
Safety features include an inbuilt EMI filter and IP 21 enclosure protection. The charger employs forced air cooling, with dimensions approximately 228mm x 105mm x 70mm and a weight of about 2.08 kg. Variants of the charger are available, including the 1KW (48V) Charger, with configurations customizable according to customer requirements, suitable for both NMC & LFP batteries up to 59V/16A.
Salient Features of DPLA 1 KW-X
Micro Controller
Based Smart SMPS Charger
Temperature Protection
Over Temperature Protection
Charging
Multistage CC-CV Charging
Short Circuit Protection
Short Circuit Protection
Battery Protection
Battery Reverse Polarity Protection
Rating
60V 16A, 60V 13A
BMS
BMS Auto Fault Reset Switch
Maximum Power
1000W
Voltage Protection
Over Voltage & Over Current Protection
Communication
CAN (optional)
AC RMS Input Voltage Range | 160VAC-285VAC RMS, Single Phase | ||
Maximum AC RMS Input Current | 6.5A (±1 A) | ||
Maximum AC Input Power | 1056W (±50 W) | ||
AC Input Frequency | 47Hz-53Hz | ||
Peak Efficiency | >90% | ||
Power Factor | 0.6 @ 230 Vac | ||
Inrush Current | <84A |
Rated Power | 1KW (±50 W) | ||
Maximum DC Output Current | 16A (±1 A) | ||
Maximum DC Output Power | 940 W @ 230 Vac | ||
Maximum Output Voltage | 58.8V (±0.2 V) | ||
Ripple | Voltage(pk-pk) | 80mV(±10mV) | |
Current(pk-pk) | 293 mA(±10mA) | ||
Line Regulation | <2% | ||
Load Regulation | <2% | ||
Battery Type | LITHIUM ION |
Over Current | >16A+1A | ||
Over Voltage | 58.8V (+0.2V) | ||
Short Circuit Output | PROVIDED | ||
Over Temperature | PROVIDED | ||
Reverse battery polarity | PROVIDED |
Soft start | YES | ||
Pri-charging function | PROVIDED |
LED Indication | POWER ON (Green) | ||
CHARGING ON (RED-BLINK) | |||
FULL CHARGE (GREEN-SOLID) |
DC Output Connector | SMH-50 | ||
AC Input Connector | 16A 3 PIN Inbuilt Top | ||
Input Wire Length | 1500mm (±50mm) | ||
Input Wire Copper | 1 SQ mm 3 CORE | ||
Output Wire Length | 1500mm (±50mm) | ||
Output Wire Copper | 3 SQ mm 2 CORE |
Operating Temperature | 0°C to 50°C | ||
Humidity | 5 to 90% non-Condensed | ||
Storage Temperature | 0°C to 50°C | ||
Testing Result at %95 RH@38°C | Passed |
EMI | Inbuilt EMI Filter |
Enclosure Protection | IP 21 | ||
Dimension(L*W*H) | ~(228mmx105mmx70mm) | ||
Cooling | Forced Air Cooling | ||
Drop Test Result (If Applicable) | PASS | ||
Weight | ~2.08 Kg |